PurpleAir - FLEX - Air Quality Monitor

Description: PurpleAir - FLEX - Air Quality Monitor Includes power supply and optional SIM chip This unit is a bit hard to get all connected via wireless, FYI. The PurpleAir Flex is our hybrid monitor, featuring components of the Zen in the housing of the Classic.As an outdoor sensor, it’s perfect for residential, commercial, or industrial users looking to collect real-time PM2.5 data. Connect it to WiFi to view that data on the interactive map, accessible by any smart device. An LED displays AQI information at a glance, and a modular design provides easy access to internals.This sensor contains an SD logger for offline data collection but does come with a microSD card. New generation PurpleAir particulate sensor with built in RGB LEDUser replaceable dual Laser Particle Counters (PMS-6003)Pressure, Temperature, Humidity & Gas Sensor (BME688)Built-in SD card logging and real-time clock for offline data captureWiFi connectivity with data stored in the cloud Dimensions3.5 in x 3.5 in x 5 in (85 mm x 85 mm x 125 mm)ColorWhitePower requirements5V USB Micro, 0.18A continuous, 600mA peakIntended UseOutdoor and indoor useWiFiYesExpansion PortYesInternal StorageYes, included microSDWarrantyOne (1) year limited warrantyLaser Particle CountersClass 1 Laser. A Class 1 laser is safe under all conditions of normal use.ManufacturerPlantowerThis device contains two particle detectors to provide redundancy and help determine sensor health.TypePMS-6003 (2)Range of measurement0.3, 0.5, 1.0, 2.5, 5.0, & 10 μmCounting efficiency50% at 0.3μm & 98% at ≥0.5μmEffective range(PM2.5 standard)*0 to 500 μg/m³ Maximum range (PM2.5 standard)*≥1000 μg/m³Maximum consistency error (PM2.5 standard)±10% at 100 to 500μg/m³ & ±10μg/m³ at 0 to 100μg/m³Standard Volume 0.1 literSingle response time ≤1 secondTotal response time ≤10 secondsPressure, Temperature, Humidity, & Gas SensorManufacturerBOSCHModel NumberBME688Temperature range-40°F to 185°F (-40°C to 85°C)Pressure range300 to 1100 hPaHumidityResponse time (τ63%): 8sAccuracy tolerance: ±3% RHHysteresis: ≤1.5% RHGasResponse time (τ33-63%): <1sResolution: ±0.08%Built-in SD Card Logger & Real-time ClockReal-time Clock (RTC)DS3231Extremely accurate I2C real-time clock Real-time Clock BatteryCR2032 3VSD CardMicroSD card Takes microSD cards up to 64GBSD Card FormatFAT32SD Card Data AccessRemove the microSD card by pushing it in to unlatch and then pull out with tweezers. Insert the SD card into a computer to WirelessContains Transmitter Module FCC ID: 2AC7Z-ESPWROOM02DWireless Networks802.11b/g/n @ 2.4GHz(WPA2 pre-shared key or open networks)CertificatesFCC/CE/TELEC/SRRCTx Power802.11 b: +20 dBm802.11 g: +17 dBm802.11 n: +14 dBmRx Sensitivity802.11 b: -91 dbm (11 Mbps)802.11 g: -75 dbm (54 Mbps)802.11 n: -72 dbm (MCS7)Antenna Type2 dBi on-board PCB antennaFCC Compliance Statement (Part 15.19)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:This device may not cause harmful interference, andThis device must accept any interference received, including interference that may cause undesired operation.Warning (Part 15.21)Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC Interference Statement (Part 15.105 (b))This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.To comply with FCC/IC RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Price: 189.95 USD

Location: Knoxville, Tennessee

End Time: 2024-12-02T00:38:12.000Z

Shipping Cost: N/A USD