HD Tikka T3x Tac A1 30 MOA Scope Mount

Description: There is a screw in the front of the original mount that is located underneath the handguard. The handguard must be removed and then this screw must also be removed before the original mount can be removed. Removing the original mount may be a difficult task. Please use caution when removing the original mount and when installing our mount. Please refer to our video above for mounting instructions. We always recommend having our products installed by a competent and qualified gunsmith. Metric screws are only available with hex heads. Check out the Tikka FAQ page here for more info. We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. We recommend:0 MOA - if shooting 0-500 yards20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Price: 64.99 USD

Location: Quakertown, Pennsylvania

End Time: 2025-01-14T21:09:38.000Z

Shipping Cost: N/A USD