Green Stuff World Modeling Clays Various Varieties

Description: Green Stuff modeling clay (Kneadatite Blue/Yellow) is a plastic epoxy putty that cures at room temperature and can be purchased in both roll and stick form.Cut off 50/50% or 60/40% of the yellow and blue strips, knead these two parts well until the mixture turns green and sticky. After mixing, you have about 90 minutes to model and add details. Maximum hardness is reached after 24 hours. By changing the proportions of the yellow/blue components, faster/slower curing or more or less hardness can be achieved.Since the combined mixture of resin and hardener sticks, we recommend some type of lubricant to ensure smoother surfaces. Normally you use enough water, but some sculptors also use a little oil, Vaseline or Jonson oil. Always keep tools moistened. By adding talcum powder, the consistency of the resin can be easily changed and fingerprints can be avoided.Brown Stuff modeling clay)It is a room temperature in which a two-component epoxy/polyamide putty is cured. Excellent adhesion to metal and 90 minute processing time.Similar to green putty but with a thicker consistency and therefore this putty is much easier to work with for beginners. This putty can be mixed with other epoxy putties to vary the texture and also the final hardness.It becomes very hard, great for finer details such as sharp points, points, weapon blades, armor and other hard area details.Cut off 50/50% or 60/40% of the yellow and blue strips, knead these two parts well until the mixture turns green and sticky. After mixing, you have about 90 minutes to model and add details. Maximum hardness is reached after 24 hours. By changing the proportions of the yellow/blue components, faster/slower curing or more or less hardness can be achieved. Since the combined mixture of resin and hardener sticks, we recommend some type of lubricant to ensure smoother surfaces. Normally you use enough water, but some sculptors also use a little oil, Vaseline or Jonson oil. Always keep tools moistened. By adding talcum powder, the consistency of the resin can be easily changed and fingerprints can be avoided. Similar to green putty but with a thicker consistency and therefore this putty is much

Price: 7.06 USD

Location: Recklinghausen

End Time: 2024-11-14T01:02:20.000Z

Shipping Cost: 15.28 USD