Description: WE DO NOT SHIP THIS PRODUCT FOR USAGE IN THE USA. The DATAKOM DKG-117 is a microprocessor controlled synchroscope with programmable synch check relay in a DIN72 front panel mounted package. It monitors the voltage and frequency of 2 independent power networks as well as the instantenous phase angle between them. The measured parameters are displayed on the 3 digit digital display. The 24 led circular synchroscope displays the phase angle between 2 networks. The synchroscope display is only activated if both network voltages are within the set limits. The DKG-117 is mainly used in manual genset synchronization applications for synchronization checking between a genset and the genset busbar or between the genset busbar and the mains. The DKG-117 provides a comprehensive set of digitally adjustable threshold levels and timers. All programs are modified via front panel pushbuttons, and do not require an external unit. It monitors the voltage and frequency of 2 independent power networks as well as the instantenous phase angle between them. The measured parameters are displayed on the 3 digit digital display. The 24 led circular synchroscope displays the phase angle between 2 networks. The synchroscope display is only activated if both network voltages are within the set limits. The synchronization checking is enabled either via the SYNCH CHECK ENABLE signal input or by depressing the front panel SYNCH pushbutton. The synchronization checking consists of the verification of below conditions during 4 consecutive busbar cycles: - the busbar voltage between set limits - genset phase voltage between set limits - busbar-genset frequency difference below the set limit - busbar-genset voltage difference below the set limit - busbar-genset phase angle below the set limit FEATURES: • 24 led circular synchroscope • Programmable ?V, ?f, ?? for check synch relay • Synch Check Enable input • Dead Bus Enable input • Auto power off • Adjustable parameters • Front panel configurable • LED displays • Sealed front panel • Plug-in connection system for easy replacement • Small dimensions (72x72x52mm) and (102x102x53mm) • Low cost TECHNICAL SPECIFICATIONS: Generator voltage: 300 V-AC max. (Ph-N) Generator frequency: 0-100 Hz. Busbar voltage: 300 V-AC max. (Ph-N) Busbar frequency: 50/60 Hz. Digital inputs: 0 - 30 V-DC. Internally connected to battery positive DC Supply Range: 9.0 to 33.0 V-DC Cranking dropouts: survives 0 V for 100ms. Typical Standby Current: 100 mA-DC Maximum Operating Current: 150 mA-DC (Relay outputs open) Check Synch Relay Output: 10 A / 28V-DC Operating temp.: -20°C (-4°F) to 70°C (158°F). Storage temp.: -30°C (-22°F) to 80°C (176°F). Maximum humidity: 95% non-condensing. IP Protection: IP65 from front panel, IP30 from the rear. Measurement category: CAT II Air category: Pollution degree II Dimensions: 102x102x53 mm (WxHxD) Panel Cut-out Dimensions: 92x92 mm minimum. Mounting: Front panel mounted with rear retaining steel spring. Weight: 170 g (approx.) Case Material: High Temperature ABS (UL94-V0, 100°C)
Price: 177 USD
Location: Ljubljana
End Time: 2024-10-14T12:12:18.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: DATAKOM
Equipment Type: Synchroscope and check synch relay
Country/Region of Manufacture: Türkiye
MPN: 01171
