Custom 3D printed head upgrade for Magic Square MS-02 Light of Peace

Description: Custom designed, 3D printed and painted upgrade head. This listing is for the finished 3D part shown in the first photo only. Toy shown is for reference only and is NOT included. This is an homage to the G1 toy. Two adapters are included. The single piece requires you to remove the entire head from the ball socket. Then insert the adapter sideways, and turn to face the front to keep in place. The second adapter is in case you are not comfortable pulling the ball joint out of the socket. It does require alot of force. In this case, you need to disassemble the head. Remove the helmet halves, then slide the face out of the neck joint, and turn the neck joint 90º. Be aware, it might be very difficult to remove the face from the neck joint. Either way presented issues for me. So do this at your own risk. Magic Square designed this head/neck very strangely IMO. Once you do get the adapter installed, the new head just slides down over it with a slip fit. It is purposely on the loose side to avoid damage, as resin is very brittle. If you wish to tighten it up, just layer some scotch tape on the back of the adapter. I also have adapters to fit MP-10 and will have adapters to fit MP-44 in the near future. I also can make a white version to fit Star Commander (Ultra Magnus). ***PLEASE NOTE***: The colors do not match the toy. It is close enough for me. But if you are someone who needs perfect color match on toys, DO NOT BUY this. A couple disclaimers now: This is a 3D printed resin piece. 3D printed resin is very, very brittle. It does NOT have the strength, nor the durability, of injection molded plastic. So you must be VERY careful handling and installing this. And if you drop it onto a hard floor, it will almost certainly crack into pieces. Furthermore, it is hand painted with uncured spray paint. So the paint is quite susceptible to marking and scuffing. It can happen even just handling. So bear that in mind. In fact, there will be small imperfections just from me handling it while post-processing and painting. And due to the nature of 3D printing, there will be small imperfections in the print in general. With that in mind, most of these imperfections will not be noticeable from normal viewing distances in your display. I just want folks to be aware. I have other items for sale, and will combine shipping. Add the items to your cart then checkout. It should calculate the combined shipping discount automatically. If it doesn't, and you are charged the full amounts, I will refund the difference to you after payment. Or, contact me with all the items you want to buy, and I will create a custom listing for you. I ship next day, Monday through Friday, after payment is received. I do NOT ship outside the United States. Sorry.

Price: 29 USD

Location: Schiller Park, Illinois

End Time: 2024-12-08T17:40:02.000Z

Shipping Cost: 6.5 USD