Description: Crank retainer for 2-piece cranks (Bullseye and clones). Custom made (with love, in the USA) this will help keep that pesky non-drive side crank from walking off. Satin finish is standard, add $15 for full polish. Includes: drive side cap (7/8" OD); non-drive side cap (1" OD); 2 1/4-20 x 2" stainless steel bolts; 1/2" diameter x 4" wide threaded center section; 1 jam nut. Note 1: These are for cranks which are hollow all the way through. If you have the later style with the threaded slug, message me, I have a solution for that style too. Note 2: There are (at least) two different wall thickness of the tubing used in these spindles, I'll need to know which one you have. If you have a caliper and can measure your ID that's great, if not the "cheat" is to try to insert a U.S. dime into your spindle. If the dime fits you have the thinner wall, if it does not you have the thicker wall- I just need to know which one you need. Note 3: These are made to order, so if you have a special request, send me a note, we'll work it out.
Price: 60 USD
Location: La Mesa, California
End Time: 2024-01-19T04:33:01.000Z
Shipping Cost: 10 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Part Type: Cranks
Compatible Brand: For Bullseye
