Description: This is the Cowboys vs Dinosaurs Badge KIT The Cowboys vs Dinosaurs Badge is a #badgelife indie badge creation made by @alt_bier for the 3000 Society and DEFCON 32 conferences The KIT version of this badge requires some DIY soldering and assembly. This is the list of components that are provided in the kit Main Kit Bag (20x30cm-8x12in Holographic) Containing: 1x PCB panel (which breaks apart for top/front and bottom/rear PCBs) Note: The PCB might have broken apart during shipping, but this is not a problem as its required for assembly. Small Component Bag #1 (4x5cm-1.5x2in Clear) Containing: 4x Brass10mm Standoff and 2x M3 Screw set Small Component Bag #2 (5x7cm-2x2.8in Red) Containing: 1x Lipo Battery 103040 1x JST mini PH Connector Wire 2x Rubber Band Size #8 (1 req. 1 spare) Small Component Bag #3 (8x8cm-3x3in Clear) Containing: 1x Lanyand Small Component Bag #4 (6x9cm-2.4x3.5in Mylar) Containing: 1x ESP32 WeMos Lolin32 Dev Board 2x Header Male 2.54mm 1x13 Pin Strip Small Component Bag #5 (8x12cm-3.2x4,7in Mylar) Containing: 6x WS2812D 5mm 4-Pin Addressable Neopixel LED 2x White 3mm 2-pin LED 2x Red 3mm 2-pin LED 2x Blue 3mm 2-pin LED 6x 100nF Ceramic Disc Capacitor 8x 47 Ohm 6.2mm Metal Film Resistor 1x SS12D00 3-Pin SPDT Right Angle Switch 2x Header Male 2.54mm 1x2 Pin Right Angle Strip 2x Sticker (Not Required for badge Assembly)The soldering and assembly is fairly easy (all through hole components) and is documented on the badge website:cowboysvsdinos [dot] altbier [dot] us The badge theme was based on the 3000 Society conference theme of ?Cowboys vs Dinosaurs?. Since this is a gaming conference I thought it was appropriate to have them facing off at a card game with a playing card background. This badge includes an ESP32 Wemos Lolin32 development board, six neopixel addressable LEDs, six traditional one color LEDs, and five capacitive touch areas, all powered by a LIPO battery and worn using a custom lanyard. The badge also comes with two custom stickers that I made for the defcon conference. Badge details and operation instructions are available on the badge website which is printed on the badge PCB and package: cowboysvsdinos [dot] altbier [dot] us Only 200 of these badges were made. I am selling the few I had remaining after the con. So, don't wait to buy it if you like it as you may not have another chance.
Price: 85 USD
Location: Allen, Texas
End Time: 2024-11-30T18:51:37.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
