AHM RIVAROSSI HO SCALE 4-6-2 OR 4-6-4 STEAM LOCOMOTIVE CAN MOTOR UPGRADE KIT

Description: PLEASE READ DESCRIPTION THOROUGHLY and LOOK AT ALL THE PHOTOS This sale is for a flat can motor upgrade kit for HO scale AHM Rivarossi 4-6-2 and 4-6-4 steam locomotive chassis only. This motor kit is intended for the early version locomotives with the square motor or later versions with the round motor mounted in the cab. NOTE! Be sure to check to see if your engine has a square motor or a round motor inside the cab before purchasing this kit. This kit WILL NOT WORK in the new red box versions of locomotives that have a gold-colored flat can motor mounted inside the boiler. If you need to repower a Rivarossi 2-8-2, 2-8-4, or 2-10-2 locomotives, or articulated locomotives, please see my other auctions. This motor kit WILL NOT WORK in the GG1, E8, U23C, or Kraus Maffei locomotives. If you have any questions, please contact me before purchasing this kit. This may save you the hassle of returning the kit. This motor kit will provide smoother low speed operation, A LOWER TOP SPEED and operating noise will be reduced. This motor kit IS NOT recommended for large or articulated AHM Rivarossi steam locomotives. I have motor kits for these locomotives, please see my other auctions. If you have any questions, please contact me. The motor measures 25mm long x 20mm high x 15mm wide, the motor shaft is 8mm long and 2mm in diameter. At 12 volts DC with no load the motor draws 50ma and develops 7600 rpm, the stall current is 800ma. This motor will start turning smoothly on 1 volt DC. This motor is DCC compatible. The photo shows what the motor kit would look like installed on a Rivarossi 4-6-2 Pacific chassis. PLEASE NOTE: The chassis that is shown in the photo IS NOT included with the motor kit. This is an unassembled kit If you have any questions, please contact me before purchasing this kit. Installation time is about 2 hours. The motor kit consists of 1 flat can motor, new flexible coupling, hook up wire, and illustrated installation instructions. Please note, the instructions provided with the kit are for a 4-6-2 or 4-6-4 chassis. If you have any questions, please contact me. The motor kit will be shipped via USPS First Class Mail. Note to international buyers: eBay determines the rates for international shipping, not me. I have no control over what eBay charges for international shipping. Thanks for looking.

Price: 28.95 USD

Location: Prescott Valley, Arizona

End Time: 2025-02-08T00:15:10.000Z

Shipping Cost: 6.95 USD