68211-45300 New 1981 1982 Suzuki GS650GL GS850GL GS1000GL GS1100GL Fork Emblem

Description: NEW replacement emblem for vintage Suzuki fork covers. Please read the full listing and verify dimensions and all other details before ordering. Made in and ships from the US. This emblem replaces OEM part number 68211-45300. Specs:Material: Automotive-quality adhesive vinylColors: Black background, Silver foregroundDimensions: 15.8cm x 3.2cm Fitment Year/Make/Model Fork cover part # 1981 GS650GL 51871-45301 1982 GS650GL 51871-45301 1981 GS850GL 51871-45300 51871-45301 1982 GS850GL 51871-45301 1981 GS1000GL 51871-45300 51871-45301 1982 GS1100GL 51871-45301 Metal fork cover is NOT included, this listing is for the emblem only.Fork Cover Emblem Application Instructions Important:The emblem comes with a transparent matte vinyl layer to protect the emblem and to hold it while placing the emblem on the fork cover. It does not remain on the emblem after installation. Read all instructions before attempting application.Make sure the emblem is the correct size and shape for your fork cover before application. If it is not, please STOP and contact the seller for help. Unapplied emblems can be returned for a refund.Thoroughly clean the area that the emblem will be applied to. The surface that the emblem will be applied to must be absolutely smooth and perfectly clean, or a substandard look will be the result.Gently lift and unfold the transparent "ears" on either side from the back of the emblem.Gently remove the white backing paper from the emblem and discard.While holding the emblem by the transparent "ears" on either side, VERY CAREFULLY align and place the emblem. Go slow and take your time to get it right. If the vinyl is misaligned, you can gently lift it back up from one side, re-align, and try again. The vinyl WILL stretch if too much force is used, or with too many attempts, so GO SLOW.With a credit card or guitar pick, carefully but firmly "rub" the whole surface of the emblem to ensure full adhesion to the fork cover. Pay extra attention to the corners as these are more likely to lift up.Remove the top transparent vinyl layer. If there are any bubbles or wrinkles after application, these can be "massaged" out with a credit card. Bubbles can be "popped" with a small sharp pin and the pinholes will not be visible afterward.For best results,mask off the chrome and spray a thin coat of gloss or semi-gloss automotive-quality clear coat. This will seal the edges of the vinyl to prolong its life, make it easy to clean, and produce a quality result.Important: Emblems cannot be returned once either the protective transparent matte vinyl layer OR the white backing paper has been removed. Make sure the emblem will fit before application and TAKE YOUR TIME aligning it during application.Please contact me through eBay if you have any questions at all.

Price: 14.96 USD

Location: Ypsilanti, Michigan

End Time: 2025-01-04T14:48:38.000Z

Shipping Cost: 0 USD