4PRO WC433-21 Generator Wireless Remote Control Set

Description: Product features Low cost controller designed to start/stop a generator manually and remotely Suitable for 1-3 phase gasoline and diesel gensets Designed for front panel mounting Survives cranking dropouts Generator protection, built-in alarms and warnings Product description This set is designed to wirelessly control any electric start generator having a remote start input or being specially adapted for this purpose. It includes a 2-button transmitter and a receiver with relayed normally open (NO) and normally closed (NC) contact groups. The set could remotely start and stop a generator on 10-100 meter distance depending on possible obstacles between transmitter and receiver directly connected to generator. 4PRO WT433-02 GENERATOR WIRELESS REMOTE CONTROL TRANSMITTER TECHNICAL SPECIFICATIONS: Current consumption in active state: ≤12mA Working frequency: 433.92 MHZ Modulation: AM Transmit distance: 10-100m Dimensions: 61×30×12mm 4PRO WR433-01 GENERATOR WIRELESS REMOTE CONTROL RECEIVER TECHNICAL SPECIFICATIONS: Voltage: 12V DC or 24V DC depending on configuration settings Working temperature: -30℃-+70℃ Frequency: 433MHz Memory capacity: 30 learning/fixed code transmitters Standby current consumption: ≤9mA Relay current output rating: up to 5A Dimensions: 62×43.5×30mm RECEIVER CONFIGURATION SETTINGS To change the configuration jumper settings, please remove a receiver plastic case by loosening two screws from the device bottom side. 3S-Jumper (if closed): to activate the relay for 3 seconds only; L-Jumper (if closed): to activate/deactivate the relay by the ON button only with both state fixed; M-Jumper (if closed): to activate the relay by the ON button and deactivate by the OFF bu

Price: 57 USD

Location: Gori

End Time: 2024-09-22T12:31:08.000Z

Shipping Cost: 0 USD